Dell Dell PowerVault MD32X0i 구현 매뉴얼 - 페이지 6
{카테고리_이름} Dell Dell PowerVault MD32X0i에 대한 구현 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dell PowerVault MD32X0i 33 페이지. Storage arrays
페이지 인쇄PowerVault™ MD32X0, MD32X0i, and MD36X0i Series of Storage Arrays: Implementing Hyper-V
http://www.dell.com/hyperv
Both the MD32X0, MD32X0i, and MD36X0i storage arrays are supported with the Microsoft Windows
Server 2008 Release 2 operating running the Hyper-V role.
Pre-Installation Requirements
You must have the following hardware and software installed and set up to use Hyper-V on an MD32X0,
MD32X0i, or MD36X0i storage array.
Hardware Requirements
To install and use the Hyper-V role, make sure that you have the following processing features on your
system:
•
A x64-based processor
•
Hyper-V is not available for 32-bit systems or Intel® Itanium®-based systems.
•
Hardware-assisted virtualization
•
Processors with Intel Virtualization Technology (Intel VT)
•
AMD Virtualization Technology (AMD-V)
•
Hardware-enforced data execution prevention (DEP) must be available and enabled.
•
The Intel XD bit must be enabled (execution disable bit).
•
The AMD NX bit must be enabled (no execute bit).
Software and Configuration Requirements
Install the updates that you need. To receive a current list of all of the updates, go to this website:
http://technet.microsoft.com/en-us/library/dd430893.aspx
Figure 1 shows how to configure a Microsoft Hyper-V environment with an MD32X0 storage array.
Page 4