Dell DX6012S 설치 및 구성 매뉴얼 - 페이지 22

{카테고리_이름} Dell DX6012S에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell DX6012S 35 페이지. Rack installation instructions — static rails
Dell DX6012S에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지), 하드웨어 설치 지침 (2 페이지), 사용자 설명서 (46 페이지), 설정 및 구성 매뉴얼 (43 페이지), 시작하기 매뉴얼 (28 페이지), 공지 사항 (28 페이지), 공지 사항 (20 페이지), 개요 (19 페이지), 구성 매뉴얼 (9 페이지), 구성 매뉴얼 (9 페이지), 릴리스 노트 (8 페이지), 구성 매뉴얼 (7 페이지), 릴리스 노트 (6 페이지), 릴리스 노트 (5 페이지), 릴리스 정보 (5 페이지), 시작하기 매뉴얼 (47 페이지), 설치 (2 페이지), 랙 설치 (2 페이지)

a backup set from the restored manifest list. The primary's backup manifest must have at least

2 backups in it prior to being used for failover. To assist with this transition, the secondary CSN

periodically pulls the primary's Backup Manifest UUID via the privileged SSH channel and stores

it in the following location on the secondary: /etc/caringo/csn/primary-manifest.txt. A

timestamp on this file will notate the last time it was updated.

To restore a manifest, click the 'Change Manifest' button at the top of the backup interface. This

will bring up a entry box where the UUID you would like to restore can be entered. The entered

UUID must be for a valid backup manifest created by the backup utility. If restoring a manifest on

a machine that has an existing manifest and associated backups, admins must be aware that the

backup list will be completely overwritten when the entered manifest is restored.

Administrators should be aware that the secondary will effectively take on the identify of the primary

when the manifest and a selected backup within it are restored.

Note

Demotion of a Secondary CSN's backup set onto a Primary CSN is not supported.

Failover should only be done when the Primary is not expected to return to service soon

enough for the environment's needs. A complete software rebuild of the original Primary

to reconfigure it as a Secondary will be necessary before returning it to service after a

Secondary has taken over its role.

3.5.5.1. Failover Without DX Storage

If the failure or demotion of the Primary CSN coincides with an outage of the DX Storage cluster,

you will be unable to pull the Primary's Backup Manifest UUID from the cluster to restore it onto

the Secondary. In this scenario, an administrator can manually restore the Primary CSN's last

recorded backup set, which is updated hourly on the Secondary CSN if it has changed. The

following command will restore the Primary's backup set onto the Secondary, effectively making

the Secondary assume the role of the Primary CSN. The script should only be performed from the

Secondary CSN with both the Primary CSN and the DX Storage cluster offline:

/opt/caringo/csn/bin/failover_without_castor

The script will restart the Secondary CSN after the Primary's configuration has been restored.

Version 2.0

December 2010