Dell EqualLogic FS7600 설치 및 설정 매뉴얼 - 페이지 21

{카테고리_이름} Dell EqualLogic FS7600에 대한 설치 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EqualLogic FS7600 46 페이지. Appliances
Dell EqualLogic FS7600에 대해서도 마찬가지입니다: 개요 (7 페이지), 하드웨어 사용 설명서 (32 페이지)

페이지 인쇄

3 Power Connections

After installing the appliance in a rack, connect it to power and make sure it is operational.

Connecting an Appliance to Power

1. Remove the power cables from the shipping box.

2. Plug the power cables into the appliance power supplies. Wrap the hook-and-loop strain relief around the

power cable, as shown in

3. Connect the appliance to a power source.

The appliance turns on as soon as the power supplies are connected to a live power source.

Each controller contains a backup power supply (BPS). The BPS batteries begin to charge when the

appliance is connected to power. A full charge takes up to eight hours to complete; the NAS

appliance is not fully redundant until the battery is fully charged. The BPS provides the clustered

solution enough time to write all cached data to disk if the controller experiences a loss of power.

4. Check the LED on the front panel to make sure the appliance is operational (see

Figure

Figure 7: Secure the Power Cable with the Strain Relief

Figure

3).