Dell EqualLogic FS7600 하드웨어 사용 설명서 - 페이지 15
{카테고리_이름} Dell EqualLogic FS7600에 대한 하드웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EqualLogic FS7600 32 페이지. Appliances
Dell EqualLogic FS7600에 대해서도 마찬가지입니다: 개요 (7 페이지), 설치 및 설정 매뉴얼 (46 페이지)
페이지 인쇄
2 Replacing Components
This chapter describes how to replace appliance components or the entire appliance.
Safety Recommendations
Follow these safety recommendations:
•
Before you work on the EqualLogic FS7600 hardware, read and follow the safety instructions packaged with
your system.
•
Use care when moving and opening the shipping box. Leave the components packaged until you are ready to
install them.
•
Place the components in a protected area that has adequate airflow and is free of excessive humidity,
flammable gas, and corrosion.
•
You need at least two people to install the hardware. Use proper lifting and carrying techniques when
unpacking and moving the components.
•
Make sure each FS7600 NAS appliance is fully grounded at all times to prevent damage from electrostatic
discharge.
•
When handling an FS7600 NAS appliance or any of its components, use an electrostatic wrist guard or a
similar form of protection. See
•
Hold the hardware level with the rack when you install it.
Required Tools
The following tools are needed to replace the appliance or its components; these are not provided.
•
#2 Phillips screwdriver
•
Electrostatic wrist strap or other form of ESD protection
Using an Electrostatic Wrist Strap
You must use an electrostatic wrist strap to protect sensitive hardware from electrostatic discharge.
1. Connect the steel snap on the coiled cord to the stud on the elastic band. See
Using an Electrostatic Wrist Strap on page
9.
Figure
6.
9