Dell EqualLogic PS Series 하드웨어 사용 설명서 - 페이지 10
{카테고리_이름} Dell EqualLogic PS Series에 대한 하드웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EqualLogic PS Series 50 페이지. Storage arrays
Dell EqualLogic PS Series에 대해서도 마찬가지입니다: 설정 (2 페이지), 하드웨어 사용 설명서 (48 페이지), 하드웨어 유지 관리 (46 페이지)
페이지 인쇄
PS6610 Hardware Owner's Manual
Item
Indicator
1
Enclosure
Status
Indicator
2
Input
Switch
3
Power
On/Standby
4
Module
Fault
5
Logical
Status
6
Drawer 1
4
Figure 4: Enclosure Status Indicator
Table 3: Enclosure Status Indicator Description
Description
Unit ID Display — A numerical display whose primary function
is to display the enclosure unit identification number. This display
can be helpful when setting up and maintaining a multiple-
enclosure storage center.
Used to set the Unit ID Display
Off — The enclosure does not have power
Green — The enclosure is on (operational)
Amber — The enclosure is in standby mode (not operational)
Indicates the current health condition of the array:
•
Off — No faults
•
Amber (blinking) — Warning condition
•
Amber (steady) — Critical condition that might be set by
either a hardware fault or a RAID double-fault condition or
similar error. Additionally, an LED might be lit on a PSU,
drawer, DDIC, fan module, or IO module indicating the part at
fault.
Indicates a drive fault. The LED lights up amber when there is a
drive fault of some kind. A fault LED will also be lit on the
offending drive(s) in the system, and the sideplane status indicator
will show a logical fault.
Amber when a drive, cable, or sideplane fault has occurred in
1 Basic Storage Array Information