Dell EqualLogic PS Series 하드웨어 사용 설명서 - 페이지 41
{카테고리_이름} Dell EqualLogic PS Series에 대한 하드웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EqualLogic PS Series 50 페이지. Storage arrays
Dell EqualLogic PS Series에 대해서도 마찬가지입니다: 설정 (2 페이지), 하드웨어 사용 설명서 (48 페이지), 하드웨어 유지 관리 (46 페이지)
페이지 인쇄
5 Maintain Fan Modules
The PS6610 array contains five cooling fan modules.
The array is capable of operating with one failed fan module; however all five cooling modules are
required to maintain long-term cooling and reliability of the array.
Remove a Cooling Fan Module
Although an array can operate with only four working fan modules, you should replace the failed fan
unit as soon as possible. For proper array cooling, do not remove the failed fan unit until you are
ready to replace it.
Caution:
The fan module replacement procedure (removal and installation) should be completed in
less than 2 minutes to ensure proper cooling of the array.
How to Remove a Cooling Fan Module
Wear electrostatic protection when handling a cooling module. See
Hardware Protection on page
6.
To remove a cooling module:
1. From the rear of the unit, hold the handle protruding from the cooling fan and push down on the
orange release latch to the right (callout 2 in
Figure
26) with your thumb.
2. Pull the module from the slot, as shown in
Figure
26, until it is clear of the chassis.
Figure 26: Removing a Cooling Fan Module
35