Dell EqualLogic PS5500 유지 관리 매뉴얼 - 페이지 2
{카테고리_이름} Dell EqualLogic PS5500에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EqualLogic PS5500 8 페이지. Equallogic ps series iscsi storage arrays with microsoft windows server failover clusters
Dell EqualLogic PS5500에 대해서도 마찬가지입니다: 하드웨어 매뉴얼 (50 페이지)
페이지 인쇄
•
Messages. A message on the LCD panel (located behind the bezel), on the console, in the event log,
or in the Group Manager GUI Alarms panel describes a disk drive failure.
•
Group Manager GUI and CLI output. The Member Controllers window or the
name show disks
LED Location
Front of array
Array front panel
(behind bezel)
On disk drive
Disk Drive Handling Requirements
Handle the disk drives as follows:
•
Protect disk drives from electrostatic discharge. When handling a disk drive, always wear an
electrostatic wrist strap or a similar protective device.
•
Hold a disk drive only by the plastic part of the carrier. Do not pick it up by the release lever.
•
Insert a disk drive in the correct position, with the latch toward the rear of the array (where the power
supplies and control modules are). Do not force a disk drive into a slot.
2
command output shows a failure.
Figure 2: LED on Disk Drive
Table 1: Disk Drive LED Descriptions
Color
Off
Yellow
Flashing yellow
Off
Green
Flashing green
Off
Yellow
Description
Normal operation or no power.
Array is in standby mode.
One or more drive failures.
No power.
Normal operation.
Disk activity.
Normal condition or no power.
Failed disk drive.
member select
PS5500 Disk Drive Maintenance