Dell PowerEdge 4400 매뉴얼 - 페이지 11

{카테고리_이름} Dell PowerEdge 4400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4400 15 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 4400에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지), 업데이트 매뉴얼 (8 페이지), 정보 업데이트 (8 페이지), 사용자 설명서 (42 페이지), 랙 설치 (34 페이지), 하드웨어 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (36 페이지)

6. The system will shut off. The connection LED on the NIC and switch or hub

will remain on indicating the NIC is monitoring the network for wake up

packets directed to its MAC address.

7. Send a wake up signal to the MAC address of the WOL enabled NIC, and the

system will boot.

Note: If the system boot is interrupted before the operating system (OS) and the NIC

driver are loaded, the system will not be able to perform WOL again until the system is

rebooted manually and the OS and driver are allowed to load and reset the NIC's WOL

registers.

PowerEdge 350 Note: The PowerEdge350 is the only Dell server that supports Standby

and not Hibernate. The same procedures should be followed with the exception of the

Hibernate enabling step and the shutdown to hibernate. Standby is enabled by default.

Send the system in to standby by clicking Start/Shut Down then choosing Standby.

October 2007

Page 11

Dell Enterprise Product Group