Dell PowerEdge 5160 설치 매뉴얼 - 페이지 7

{카테고리_이름} Dell PowerEdge 5160에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 5160 42 페이지. Installing the external drive bay
Dell PowerEdge 5160에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (28 페이지), 업데이트 매뉴얼 (8 페이지), 정보 업데이트 (8 페이지), 사용자 설명서 (42 페이지), 랙 설치 (34 페이지), 하드웨어 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (36 페이지)

(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\opal\ts\Romb\8648Reb0.fm

support.dell.com

DIMM socket

ejectors (2)

alignment

keys (2)

Figure 1-2. Installing a DIMM

Align the RAID DIMM's edge connector with the slot in the center of the DIMM

socket, and insert the DIMM in the socket (see step A in Figure 1-2).

The DIMM socket has two alignment keys that allow the DIMM to be installed in

the socket in only one way.

NOTE: The RAID controller DIMM must be an unbuffered DIMM, rated to run at

100 megahertz (MHz) or faster. Do not substitute registered DIMMs such as

those used for system memory.

Press down on the DIMM with your thumbs while pulling up on the ejectors with

your index fingers to lock the DIMM into the socket (see step B in Figure 1-2).

7 .

Install the RAID hardware key.

Insert the hardware key into the socket (see Figure 1-1) and secure the key with

the latches on each end of the socket (see Figure 1-3). The key is designed so

that you can only insert it one way and is labeled "PE4400."

DELL CONFIDENTIAL - Preliminary

1/14/00

Dell PowerEdge 4400 Systems—Activating the PERC 3/Di

1-3