Dell PowerEdge R520 기술 매뉴얼 - 페이지 31

{카테고리_이름} Dell PowerEdge R520에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R520 50 페이지. 2-socket, 2u rack server
Dell PowerEdge R520에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 설치 매뉴얼 (8 페이지), 시작하기 매뉴얼 (9 페이지), 포트폴리오 매뉴얼 (27 페이지)

페이지 인쇄

The sliding and static rail systems for the Dell PowerEdge R520 provide toolless support for 4-post

racks with square or unthreaded round mounting holes. Both rail systems also support tooled

mounting in 4-post threaded racks, and the static rails support tooled mounting in 2-post (Telco)

racks as well for added versatility.

Compared to the R510 sliding rails that required the use of adapter brackets, the sliding rails for the

R520 now offer support for threaded hole racks with the ReadyRails II mounting interface. The

optional cable management arm (CMA) can be mounted on either the left or right side of the sliding

rails without the use of tools for fast and easy deployment. The R520 is backward compatible with

the R510 rails and CMA.

The R520 supports both sliding rails and static rails. Both rails have a new slim rail design that

supports the wide system chassis. The rails ship in the toolless mounting configuration, but can be

converted to the tooled configuration very quickly and easily.

Sliding rails include a self-adjusting feature to allow the rails to be shared across multiple systems

and accommodate various chassis depths. The sliding rail system allows you to fully extend the

server out the rack for easy access for service. The sliding rails are available with or without the

optional CMA. Figure 8 shows the sliding rails with the CMA.