Dell PowerVault 100T DDS4 핸드북 - 페이지 12
{카테고리_이름} Dell PowerVault 100T DDS4에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 100T DDS4 19 페이지. Compatibility guide
Dell PowerVault 100T DDS4에 대해서도 마찬가지입니다: 매뉴얼 (50 페이지)
페이지 인쇄
3.5
Identifying Exhausted/Expired Cleaning Tape Characteristics
The cleaning tape for a DDS/DAT drive only moves in one direction. Looking at the figure below if all of the
tape resides on the left roller, then you have a new cleaning tape. If all the tape resides on the Right roller then the
tape is expired.
Drive Type
Dell PowerVault DAT72, DDS4, and
other manufacturer DDS drives
The cleaning light on a DDS/DAT drive can come on for two reasons.
1. A periodic maintenance threshold has been exceeded.
2.
A high error rate has occurred. This can happen for 3 reasons.
•
A head clog
•
A hardware failure on the drive
•
Bad or marginal media. (see Troubleshooting Cleaning/Read/Write errors)
Note: Run Dell PowerEdge
Dell DDS/DAT Media Handbook
Figure 13- New and Expired Cleaning Media
Cleaning with a Good Tape
Tape and Drive LED will turn on while
drive is cleaned and media will eject
when completed.
Table 5 Characteristics of DDS/DAT cleaning tape in various drives
TM
Diagnostics to determine media or hardware related failures.
Cleaning with an Expired Tape
Clean light will flash rapidly and Media
Light will remain on.
Nothing will happen and tape will stay
in drive.
Page 12