Dell PowerVault 110T DLT1 사용자 설명서 - 페이지 10

{카테고리_이름} Dell PowerVault 110T DLT1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 110T DLT1 39 페이지. Dell powervault 110t dlt vs160 tape drive - user's guide
Dell PowerVault 110T DLT1에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 매뉴얼 (15 페이지), 매뉴얼 (47 페이지)

페이지 인쇄
Dell PowerVault 110T DLT1 사용자 설명서
Getting Started and Setup: Dell PowerVault 110T DLT VS160 Tape Drive User's Guide
NOTE: Install a SCSI host adapter in the selected server now, if necessary.
NOTE: If your SCSI host adapter already has a ribbon cable with an open 68-pin, high-density connector, you can use
the existing cable instead of the cable supplied with the PowerVault 110T DLT VS160 Tape Internal drive.
4. Locate the SCSI ribbon cable in the accessories package. Attach one end of the SCSI ribbon cable to the SCSI connector
on the rear panel of the PowerVault 110T DLT VS160 Tape Internal drive. The SCSI connectors are keyed, preventing
improper connection. Use a 50- to 68-pin adapter with "high-byte termination" if the existing SCSI cable uses a 50-pin
connector.
5. Attach the other end of the SCSI ribbon cable to the SCSI host adapter. The SCSI connectors are keyed, preventing
improper connection.
6. Locate an available power cable in the host server and attach it to the power connector on the rear panel of the PowerVault
110T DLT VS160 Tape Internal drive. The connectors are keyed, preventing improper connection.
Figure 3. Attach SCSI and power cables to drive
file:///C|/Users/rishi_sood/Desktop/Temp/MissingDocsPosted/110t_dlt/UG/setup.htm[3/8/2013 11:46:12 AM]