Dell PowerVault 201S 교체 지침 매뉴얼 - 페이지 7

{카테고리_이름} Dell PowerVault 201S에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 201S 14 페이지. Dell powervault 20xs storage systems enclosure services expander module installation
Dell PowerVault 201S에 대해서도 마찬가지입니다: 랙 설치 매뉴얼 (26 페이지), 매뉴얼 (9 페이지), 업데이트 (4 페이지), 구성 (2 페이지), 설치 매뉴얼 (48 페이지)

페이지 인쇄

1. Using a Phillips-head screwdriver, loosen the captive screw at the top of

the enclosure services module.

2. Grasp the handle on the enclosure services module and pull it from the

module bay (see Figure 7).

Figure 7. Enclosure Services Module Removal

3. Repeat steps 1 and 2 to remove the remaining enclosure services module.

Remove the Component Mounting Bracket

To remove the component mounting bracket, perform the following steps:

1. Using a Phillips-head screwdriver, remove the two screws that secure the

component mounting bracket to the chassis (see Figure 8).

2. Lift the component mounting bracket slightly and slide it out of the chassis.

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions

captive screw