Dell PowerVault 50F 설치 매뉴얼
{카테고리_이름} Dell PowerVault 50F에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 50F 8 페이지. Dell powervault 56f switches rack installation guide
Dell PowerVault 50F에 대해서도 마찬가지입니다: 연결 매뉴얼 (38 페이지), 사용자 설명서 (42 페이지), 랙 설치 매뉴얼 (28 페이지)
페이지 인쇄
This document explains how to install a gigabit interface converter (GBIC) module in a
Dell PowerVault 50F or 51F Fibre Channel switch.
NOTES: You can insert GBIC modules into a switch while the switch is on.
GBIC modules use standard SC connectors or high-speed serial data connectors
(HSSDC).
To install a GBIC module in a PowerVault 50F or 51F , perform the following steps:
1.
If you are installing a non-IBM
If you are installing an IBM GBIC module, ensure that the locking bar on the front
of the GBIC module is pushed to the right side of the module.
2.
Insert the GBIC module into the appropriate port.
3.
Press the GBIC module until its connector is firmly seated.
®
GBIC module, perform only steps 2 and 3.
P/N 4049T Rev. A00
August 1999