Dell PowerVault 530F 소프트웨어 업데이트 - 페이지 4
{카테고리_이름} Dell PowerVault 530F에 대한 소프트웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 530F 12 페이지. Installing versarails
Dell PowerVault 530F에 대해서도 마찬가지입니다: 랙 설치 (34 페이지), 하드웨어 설치 매뉴얼 (40 페이지)
페이지 인쇄
b
NOTICE: If the LUN configuration values for the two nodes are different, you must
contact Dell for technical assistance to correct your system configuration and
successfully upgrade your system software.
Check and record the software version number for the PowerVault 530F:
4
a
b
Record the low-level configuration information:
5
a
b
c
If you are using software version 1.32 and your storage area network (SAN)
6
configuration uses IP mirrors, perform the following steps to upgrade the PowerVault
530F backup-and-restore utility program. (This upgrade adds the capability to back up
and restore IP mirror configuration data.)
NOTICE: Do not perform this step for software version 1.2 x . The backup utility patch
is not backward-compatible and can damage the configuration information for older
versions of the system software.
a
b
1-2
Up g r a d i n g Yo u r S y s te m S o f t war e
If the PowerVault 530F is part of a redundant pair, run the dumpall.exe utility
again, specifying the failover node.
Compare the two text files generated by the dumpall.exe utility for both
PowerVault530F nodes. In the logical unit number (LUN) section, compare the
LUN numbering and the Max Block Size parameters for each LUN to confirm that
the configuration information for the two nodes is identical.
Access the SAN Appliance Menu from an attached keyboard/video/mouse or from
a virtual network computing (VNC) remote control client.
See the Dell PowerVault 530F System Administrator's Guide for information about
setting up a VNC remote control client.
Record the version number displayed in the upper right-hand corner of the screen.
From the main menu, click System Settings—>Network Properties, and record
the Computer Name.
Click the Protocols tab, and then click Properties.
Record the Internet protocol (IP) address and subnet mask for both adapters
listed in the Adapters dialog box. (Click the down arrow on the right end of the
Adapters box to select the Gigabit Ethernet adapter.)
If you have PowerVault 650F storage systems attached to the PowerVault 530F,
click Applications—>Data Agent, and record the information displayed in the
Privileged Users section.
From the system used to manage the PowerVault 530F, open the directory that you
extracted the dumpall.exe utility and other files to in step 1.
Follow the instructions in the readme.txt file to install the backup utility patch.