Dell PowerVault 56F 랙 설치 매뉴얼 - 페이지 21

{카테고리_이름} Dell PowerVault 56F에 대한 랙 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 56F 28 페이지. Dell powervault 56f switches rack installation guide
Dell PowerVault 56F에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 연결 매뉴얼 (38 페이지), 설치 매뉴얼 (8 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄

support.dell.com

NOTE: If the slide assemblies were preinstalled by Dell, you can skip this section.

You must allow 2 U (3.5 inches) of vertical space for each PowerVault 56F switch you

install in the rack.

NOTE: The vertical rails of the rack are marked by small indentations in 1-U incre-

ments (see Figure 6).

1 U (1.75 inches)

For more information about requirements for installing components in a Dell rack, see

the Dell Rack Advisor software available on the Dell Web site at:

http://support.dell.com.

To install the slide assemblies in the rack, perform the following steps:

NOTE: Each slide assembly has a fixed (non-adjustable) and floating (adjustable)

mounting bracket. When installing the slide assemblies in the rack, make sure that

the fixed mounting bracket is mounted at the front of the rack; otherwise, you will not

be able to install the switch.

Place the front of the template on the vertical rails at the front of the rack where

you want to install the switch.

Ensure that the printing on the template identifies the side facing outwards as

the template front.

Dell PowerVault 56F Systems Rack Installation Guide