Dell PowerVault 715N 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Dell PowerVault 715N에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 715N 44 페이지. Network attached storage
Dell PowerVault 715N에 대해서도 마찬가지입니다: 업데이트 지침 (4 페이지), 사용자 설명서 (31 페이지)
페이지 인쇄
Green indicates normal operation.
Flashing amber indicates a system failure.
Warning Indicators
Any pattern or color indicates a system error. See
information about possible system errors.
Off indicates normal operation.
LAN Indicators
LAN 1 LED
Green indicates that the system is connected to the network through the LAN 1 port.
Flashing green indicates that activity between the system and other devices on the network.
Off indicates that the system is disconnected from the network or that the LAN 1 port is not working properly.
LAN 2 LED
Green indicates that the system is connected to the network through the LAN 2 port.
Flashing green indicates that activity between the system and other devices on the network.
Off indicates that the system is disconnected from the network or that the LAN 2 port is not working properly.
Hard-Drive Indicators
Each hard drive has two LED indicators, an operation LED on the left side and an activity LED on the right side. LEDs are
visible when the bezel is attached to the front of the system. The LEDs provide the following information for each drive:
Green on the operation LED indicates that the hard drive is installed in the drive bay and working.
Amber on this LED indicates that the hard drive is installed in the bay, but it is not working properly.
Flashing amber on the activity LED indicates that read or write activity is occurring on the hard drive.
Back to Contents Page
"System
Messages" and
"System Beep
Codes" for more