Dell PowerVault 750N 시작하기 - 페이지 7
{카테고리_이름} Dell PowerVault 750N에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 750N 10 페이지. Installing microsoft updates and service packs
Dell PowerVault 750N에 대해서도 마찬가지입니다: 플랫폼 매뉴얼 (40 페이지), 업데이트 매뉴얼 (10 페이지)
페이지 인쇄
Ta b l e 1 - 1 .
K i c k - S t a r t C o n f i g u r a t i o n O v e r v i e w
Step 1
Use this guide and the
Resource CD included with
your system.
Perform one of the following methods of configuration:
Remote IP Network
Appliance does not have a
monitor and keyboard attached
but is connected to an IP
network.
Go to a workstation on your
a
network, insert the
Resource CD, and run
Remote Kick-Start.
Enter information collected
b
in step 2 and save the
configuration.
Select a NAS appliance,
c
select the configuration,
and then click Apply.
Start the NAS Manager in a
d
browser from a remote
workstation using the
address:
https://myappliance:1279,
where myappliance is your
system name.
Record the following information:
NIC 0: IP Address
NIC 0: Subnet Mask
NIC 0: Gateway
NIC 1: IP Address
NIC 1: Subnet Mask
NIC 1: Gateway
Host Name
DNS Server
Administrator/Root Password
User/Password (if any)
Step 3
Remote Diskette
Appliance does not have a
monitor and keyboard attached
and is not connected to an IP
network.
Go to a workstation on your
a
network, insert a diskette,
and then insert the
Resource CD.
Run Remote Kick-Start to
b
copy the configuration
settings to the diskette.
Enter the information
c
collected in step 2 and save
the configuration to the
diskette.
Insert the diskette into the
d
appliance diskette drive.
Start the NAS Manager in a
e
browser from a remote
workstation using the
address:
https://myappliance:1279,
where myappliance is your
system name.
Us i n g Yo u r Ap p l i a n ce f or t he F i rs t T im e
Step 2
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_____________________
_____________________
_____________________
_____________________
Local
Appliance has a monitor and
keyboard attached.
Power on the NAS
a
appliance.
The Kick-Start utility
appears.
Follow the screen
b
instructions and enter data
you collected in step 2.
When you finish, the
system restarts.
Start the NAS Manager in a
c
browser from a remote
workstation using the
address:
https://myappliance:1279,
where myappliance is your
system name.
1-5