Dell PowerVault 775N 플랫폼 매뉴얼 - 페이지 9

{카테고리_이름} Dell PowerVault 775N에 대한 플랫폼 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 775N 10 페이지. Storage servers
Dell PowerVault 775N에 대해서도 마찬가지입니다: 플랫폼 매뉴얼 (8 페이지), 업데이트 매뉴얼 (10 페이지), 정보 업데이트 (26 페이지), 정보 업데이트 (14 페이지), 구성 (9 페이지), 소프트웨어 업데이트 (1 페이지), 특징 (2 페이지)

페이지 인쇄

Table 1-3. Direct-Attached Clusters Rules and Guidelines

Rule/Guideline

Dell | EMC CX400 core

software

Dell | EMC CX200 core

software

Additional software

application programs

Attaching Your Cluster Shared Storage System to a SAN

This section provides the rules and guidelines for attaching your NAS cluster nodes to the shared

storage systems through a Dell | EMC SAN using redundant Fibre Channel switch fabrics.

Rules and Guidelines

The rules and guidelines described in Table 1-4 apply to SAN-attached clusters.

Table 1-4. SAN-Attached Clusters Rules and Guidelines

Rule/Guideline

Primary storage

Secondary storage

Fibre Channel switch

configuration

Fibre Channel switch

zoning

Fibre Channel switches

Fibre Channel switch

firmware

Description

2.04.0 or later.

EMC Navisphere Agent 6.4 or later.

EMC Navisphere Manager 6.4 or later.

EMC PowerPath

3.00 (with 3.02 build 50 patch) or later.

EMC SnapView™ version 2.10.03 or later (not supported on the

Dell | EMC CX200).

Emulex Configuration Utility version 1.41a10 or later.

Description

Each NAS cluster can support up to 22 unique drive letters for shared

logical drives.

Up to four Dell | EMC Fibre Channel disk arrays are supported per

cluster in a SAN environment.

Up to two PowerVault 132T, 136T or 160T tape libraries.

Any system attached to the SAN can share these devices.

Redundant switch fabrics required.

Single-initiator zoning.

Dell | EMC DS-16B2 (Brocade SilkWorm 3800), Brocade

SilkWorm 3200, or Dell | EMC DS-24M2 (McData Spherion 4500).

Version 3.0.2m or later for Brocade 3200 and 3800.

Version 4.01.02 or later for McData.

(continued)

Platform Guide