Dell PowerVault DX6104 사용자 설명서 - 페이지 36

{카테고리_이름} Dell PowerVault DX6104에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault DX6104 39 페이지. Dx object storage platform
Dell PowerVault DX6104에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 시작하기 매뉴얼 (10 페이지), 매뉴얼 (37 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지), 매뉴얼 (24 페이지), 매뉴얼 (23 페이지)

페이지 인쇄

In the same terminal window, type cat /etc/redhat-release and press <Enter>.

The current Red Hat release number is displayed.

Upgrading DX Software From Version 1.0 To Version 2.x

To upgrade DX software from version 1.0 to version 2.x:

Extract the DX 2.1.1 package.

Upgrade the CSN software using the install script: caringo-csn-bundle-install.sh.

Click OK to accept restarting the system after the installation is complete.

The CSN is not functional until it is restarted.

NOTE: In the interval between upgrade and restart, the Netboot component may log errors related to a port

conflict. You can ignore these errors as these are resolved with the restart.

On the Netboot page, select the new CAStor version.

Select Cluster Services → Netboot Management, and then select castor-5.0.0-x86_64-product.

Click Update.

From the Storage Console, restart the DX cluster.

If you want to take advantage of a larger internal network in the DX system, run the changeinternalnetwork

script while the storage cluster is restarting.

For more information on updating the internal interface, see "Updating the Internal Interface" in the

Installation and Configuration Guide , version 2.0 at dell.com/support/manuals. After the upgrade, no further

configuration is required. All existing configuration and service states are preserved from their previously

configured values.

CSN