Dell PowerVault MD Series 구성 매뉴얼 - 페이지 9

{카테고리_이름} Dell PowerVault MD Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD Series 17 페이지. Fibre channel storage array configuration with dell md3600f/3620f/md3660f series storage arrays

페이지 인쇄
Dell PowerVault MD Series 구성 매뉴얼

Direct-Attached Cabling

Direct-attached cabling configurations provide simple, non-switched connections between the host server and storage
array. Redundancy is achieved in a direct-attached configuration if two RAID controllers are installed in the storage
array and multiple paths between the host sever and storage array are established.
A single RAID controller, direct-attached configuration is supported, but is not recommended due to the low level of
redundancy offered.
Single Controller Configurations
The following figures show two and four host servers, each connected to one RAID controller module. The host servers
share storage space without redundant paths. If one path fails, the host server on that path is disconnected from the
storage array.
NOTE: The MD Series Dense storage arrays do not support single-controller (simplex) configurations.
Figure 2. Two Host Servers With Dual Port HBAs Connected to a Single-Controller Storage Array
9