Dell PowerVault MD1200 기술 매뉴얼북 - 페이지 23

{카테고리_이름} Dell PowerVault MD1200에 대한 기술 매뉴얼북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD1200 23 페이지. Dell powervault storage enclosure setting up
Dell PowerVault MD1200에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지)

페이지 인쇄

8 Additional Information

•

Non-Dell drive lock-out – In order to ensure the highest quality products and best customer

experience, the PERC H800 will not allow for non-Dell™ SAS HDDs or SSDs to be initialized or

configured in a Dell™ PowerVault™ MD1200 or MD1220.

•

Backward Compatibility (MD1200) - The PowerVault™ MD1200 does not provide backward

compatible support for connecting to previous generation adapters (PERC 5/E or PERC 6/E) or

daisy-chaining with previous generation enclosures (MD1000, MD1120, MD3000, MD3000i).

MD1200 does support a drive carrier that is common with the Dell™ 11

servers.

The previous generation PowerVault™ MD1000 carrier is not compatible with the

MD1200.

•

Backward Compatibility (MD1220) - The PowerVault™ MD1220 does not provide backward

compatible support for connecting to previous generation adapters (PERC 5/E or PERC 6/E) or

daisy-chaining with previous generation enclosures (MD1000, MD1120, MD3000, MD3000i).

MD1220 supports a drive carrier that is common with the Dell™ 11

servers and the previous generation PowerVault™ MD1120.

•

Enclosure Migration and Drive Format – The PowerVault™ MD1200 and MD1220 will not be

supported behind Dell's 3Gb/s PowerVault™ External RAID enclosures, MD3000 and MD3000i.

•

Audible alarm – The PowerVault™ MD1200 and MD1220 support an audible alarm within the

enclosure (must be enabled via OMSS / PERC H800).

•

EMM blank – An EMM blank must be installed in EMM1 position if a second EMM is not installed.

This is required for proper airflow. In order to remove the EMM blank; you will need to remove

EMM0 to access a release latch (see Figure 14) for blank. This ensures the customer shuts down

the enclosure before making any configuration changes that could but data at risk.

** Available in Q3 2010

Figure 14. Latch

Generation PowerEdge™

The