Dell PowerVault MD2424 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Dell PowerVault MD2424에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD2424 36 페이지. Direct-attach storage for poweredge serve

Always follow these safety precautions to avoid injury and damage to the PowerVault MD equipment.

If equipment described in this guide is used in a manner that is not specified by Dell , the protection provided by the equipment

could be impaired.

For your safety and protection, observe the rules described in the following sections.

For your protection, observe the following safety precautions when setting up your equipment:

● Follow all cautions and instructions that are marked on the equipment.

● Ensure that the voltage and frequency of your power source match the voltage and frequency that is inscribed on the

equipment electrical rating label.

● Never push objects of any kind through openings in the equipment. Dangerous voltages, energy, or moving parts may be

present. Conductive external objects could produce a short circuit that could cause a fire, an electric shock, or other damage

to your equipment.

● Do not block or cover the openings of your product. Never place a product near a radiator or heat register. Failure to follow

these guidelines can cause overheating and affect the reliability of your product.

● Do not operate products without the cover in place. Failure to take this precaution may result in system damage.

● Do not drop the product or subject it to physical shock.

● Keep the product away from water or any liquid.

● To ship the product, pack it inside the qualified package and ship with a pallet.

● This product is intended for restricted access that is controlled by using a means of security (for example, key, lock, tool,

badge access). Personnel that are authorized for access must have been instructed on the reasons for the restrictions and

any precautions that must be taken.

● The equipment is designed for use in a data center or lab environment.

Installation of this equipment must comply with local and regional electrical regulations governing the installation of information

technology equipment by licensed electricians. For electrical power ratings on options, see the power rating label or the user

documentation that is supplied with that option.

CAUTION:

This product is designed to work with power systems that have a grounded neutral (grounded return

for DC-powered products). To reduce the risk of electric shock, do not plug products into any other type of

power system. Contact your facilities manager or a qualified electrician if you are not sure what type of power is

supplied to your building.

CAUTION:

Not all power cables have the same current ratings. Do not use the power cable that is provided with

your equipment for any other products or use. Do not use household extension cords with your product.

CAUTION:

The power cable attached to this unit is designed to connect to and be used by this device, and its

safety has been confirmed. Never use the power cable for other equipment or purposes, as this may cause fire

or electric shock.

CAUTION:

For products with multiple power cables, all power cables must be disconnected to completely

remove power from the system.

The following label indicates when multiple power supplies are installed in a system:

Safety precautions