Dell PowerVault MD2460 소유자 매뉴얼 - 페이지 25

{카테고리_이름} Dell PowerVault MD2460에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD2460 47 페이지. Direct-attach storage for poweredge servers

Figure 24. Redundant configuration using a four-port PERC H965e adapter

Redundant configuration using a two-port PERC adapter

This configuration supports two enclosures in a single chain. The PERC H840 adapter is supported only on PowerEdge 14G and

15G servers.

Figure 25. Redundant configuration using a two-port PERC H840 adapter

Before connecting to the power source, ensure that you have completed the installation process. The power supply starts up

immediately when the power cable is connected to the chassis.

Steps

1. Connect the power cables to each PSU on the back panel.

2. Secure the power cables to the PSU with the cable strap.

Connecting the enclosure