Dell PowerVault MD3060e Series 소유자 매뉴얼 - 페이지 30

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 40 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (35 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 관리자 매뉴얼 (48 페이지), 설정 (2 페이지)

페이지 인쇄
Dell PowerVault MD3060e Series 소유자 매뉴얼
When two identical power supplies are installed, the power supply configuration is redundant. In
redundant mode, power is supplied to the system equally from both power supplies to maximize
efficiency.
When one power supply module is removed or has failed, the power supply configuration is non-
redundant. Power is supplied to the system only by a single power supply module.
CAUTION: Do not plug the enclosure into a standard power outlet. Your storage enclosure is
shipped with two IEC C19 to C20 jumper cables. Connect the C19 plug to the enclosure's power
supplies and the C20 plug to the power distribution unit (PDU) in the rack cabinet. For power
redundancy, split the power connections from each enclosure into separate PDUs and connect
the PDUs to external power receptacles on different circuits. The enclosure supports only 200 V
to 240 V input sources.

Removing A Power Supply Module

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: The system requires one power supply module for normal operation. Remove and
replace only one power supply at a time in a system that is powered on.
1.
Identify and locate the faulty power supply module.
NOTE: The Service action required indicator lights amber when there is a fault in the power
supply module.
2.
Disconnect the power cable from the power source and the power supply module you intend to
remove and remove the cables from the cable securing strap.
3.
Pull and rotate the two release levers away from the chassis until the power supply module is free
from the slot.
4.
Hold the power supply module and slide the power supply out of the chassis.
30