Dell PowerVault MD3200i Series 배포 매뉴얼 - 페이지 27

{카테고리_이름} Dell PowerVault MD3200i Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200i Series 41 페이지. Storage arrays
Dell PowerVault MD3200i Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 사용자 설명서 (46 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (11 페이지), 지원 매트릭스 (17 페이지), 기술 매뉴얼북 (38 페이지), 백서 (22 페이지), 매뉴얼 (16 페이지)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

esxcli swiscsi nic list –d vmhba33

This will list all of the information for VMkernel ports that are assigned to the iSCSI Software Adapter.

Step7: Connect to PowerVault MD32XXi Storage

Now that the advanced configuration for the vSphere4 iSCSI Software Initiator has been completed, the

next stage is to connect to the Dell PowerVault SAN and to the volumes it contains.

More information for complete administration of the Dell PowerVault SAN can be found in the

PowerVault User's Guide. In this example we will attach the iSCSI Software Initiator to the SAN and to a

single volume. We will skip configuring CHAP but both one way and bi-directional CHAP is supported by

the PowerVault SAN.

The first thing to do is add the PowerVault IP Address to the dynamic discovery of the ESX Host iSCSI

Software Initiator. This is done to enable rescans to find new volumes that can be seen by ESX and used to

create Datastores.

To configure this, navigate in the vCenter GUI to Configuration -> Storage Adapters.

Click on the iSCSI Software Adapter and click Properties.

Click the Dynamic Discovery tab.

Click Add.

In the iSCSI Server box type in the IP Address of the PowerVault SAN and hit Ok.

Page 25