Dell PowerVault MD3200i Series 기술 매뉴얼북 - 페이지 13

{카테고리_이름} Dell PowerVault MD3200i Series에 대한 기술 매뉴얼북을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200i Series 38 페이지. Storage arrays
Dell PowerVault MD3200i Series에 대해서도 마찬가지입니다: 배포 매뉴얼 (41 페이지), 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 사용자 설명서 (46 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (11 페이지), 지원 매트릭스 (17 페이지), 백서 (22 페이지), 매뉴얼 (16 페이지)

페이지 인쇄
Dell PowerVault MD3200i Series 기술 매뉴얼북
DELL PowerVault MD3200i/MD3220i Technical Guide Book
MD3200i and MD3220i Front Panel Feature Description
Table 3.
FRONT PANEL / BEZEL INDICATOR AND FETAURE DESCRIPTION
Item
Indicator, Button, or
Connector
1
Enclosure status LED
2
Power LED
3
Not Applicable
4
System Identification
Button
Hard Drives
5
Not Applicable
6
Icon
The enclosure status LED lights when the enclosure
power is on.
Lights blue during normal operation and when the
management software is identifying the enclosure.
Blinks blue when the management software is identifying
the enclosure or when the system identification button is
pressed.
Lights amber when the enclosure is turned on or is reset.
Blinks amber when the enclosure is in the fault state.
The power LED lights when at least one power supply is
supplying power to the enclosure.
This LED has no use in the MD3200i or MD3220i.
The system identification button on the front control
panel can be used to locate a particular enclosure within
a rack. When the button is pushed, the system status
indicators on the control panel and the RAID controllers
blinks blue until the button is pushed again.
MD3200i—Up to 12 SAS hot-swappable drives.
MD3220i—Up to 24 2.5-inch SAS hot-swappable drives.
This switch has no use on the MD3200i or MD3220i.
Description
11