Dell PowerVault MD3220 Series 배포 매뉴얼 - 페이지 22
{카테고리_이름} Dell PowerVault MD3220 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3220 Series 38 페이지. Storage arrays
Dell PowerVault MD3220 Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 사용자 설명서 (46 페이지), 배포 매뉴얼 (38 페이지), 정보 업데이트 (1 페이지), 기술 매뉴얼북 (40 페이지), 배포 매뉴얼 (38 페이지)
페이지 인쇄
Expanding With New PowerVault MD1200 Series Expansion Enclosures
Perform the following steps to attach new PowerVault MD1200 series
expansion enclosures to a PowerVault MD3200 series storage array:
1 Before adding the expansion enclosure(s), ensure that the storage array
software is installed and is up to date. For more information, see the
Support Matrix at support.dell.com/manuals.
Install the software and driver package included on the PowerVault
a
MD series resource media.
For information about installing the software, see "Installing
PowerVault MD Storage Software" on page 25.
Set up the PowerVault MD1200 series expansion enclosure(s).
b
For information about setting up the PowerVault MD1200 series
expansion enclosure(s), see the Owner's Manual at
support.dell.com/manuals.
Using PowerVault MDSM, update the RAID controller module
c
firmware and NVSRAM to the latest versions available on
support.dell.com.
Click Tools Upgrade RAID Controller Module Firmware from the
d
Enterprise Management Window (EMW).
2 Stop I/O and turn off the system and attached units:
Stop all I/O to the storage array and turn off affected host systems
a
attached to the storage array.
Turn off the storage array.
b
Turn off any expansion enclosure(s) in the affected system.
c
3 Cable the expansion enclosure(s) to the storage array.
4 Turn on attached units:
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs are solid amber, the storage array is still coming
online.
22
Hardware Installation