Dell PowerVault MD3220i Series 배포 매뉴얼 - 페이지 39
{카테고리_이름} Dell PowerVault MD3220i Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3220i Series 41 페이지. Storage arrays
Dell PowerVault MD3220i Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 설치 매뉴얼 (18 페이지), 정보 업데이트 (1 페이지), 기술 매뉴얼북 (38 페이지), 매뉴얼 (16 페이지)
페이지 인쇄
Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software
The first thing to do is to note the vmhba# of the iSCSI Software Initiator. This can be seen in the vCenter
GUI under Configuration -> Storage Adapters.
This can also be found by running the following CLI command to discover all SCSI devices including the
iSCSI software adapter:
esxcfg-scsidevs –a
The output will look something like the following:
vmhba33 iscsi_vmk link-n/a iscsi.vmhba33
() Software iSCSI
In this example from both the GUI and CLI we can determine that the vmhba# for the iSCSI Software
Initiator is vmhba33. This will be used in the next part. This will differ on various systems based on the
devices installed.
The next piece of information to gather is the vmk# of each of the VMkernel ports. This can be done via
the GUI or CLI.
To determine the vmk# of each VMkernel port from the GUI navigate to Configuration -> Networking.
From the vSwitch that was created earlier under each VMkernel port, the vmk# will be listed.
NOTE: It is important to recognize that they may not start with vmk0, VMotion ports and other VMkernels
will utilize the same numbers based on the order they are created.
Page 37