Dell PowerVault MD3600f Series 구성 매뉴얼 - 페이지 5

{카테고리_이름} Dell PowerVault MD3600f Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3600f Series 22 페이지. Remote replication
Dell PowerVault MD3600f Series에 대해서도 마찬가지입니다: 배포 매뉴얼 (36 페이지), 설치 매뉴얼 (18 페이지), 지원 매트릭스 (17 페이지), 기능 매뉴얼 (15 페이지)

페이지 인쇄

This document provides information about configuring Fibre Channel

communication between the host server and the storage array. For basic setup

information such as racking, power cabling, and recommended handling

procedures, see the Dell PowerVault MD3600f and MD3620f Storage Array

Getting Started With Your System at support.dell.com/manuals.

NOTE:

Throughout the document, Dell PowerVault MD3600f series storage array

refers to both Dell PowerVault MD3600f and Dell PowerVault MD3620f.

Configuring Fibre Channel on Direct- and SAN-

Attached Storage Arrays

You can cable the host server to the storage array in one of two ways:

•

A direct host server-to-storage array connection using a supported Fibre

Channel cable

•

A storage array network (SAN) using a compatible Fibre Channel switch

NOTE:

For detailed information on supported Fibre Channel hardware, see the

Support Matrix

Table 1 shows the order of configuration steps for both types of connections.

These steps assume you are setting up a Fibre Channel storage for the

first time.

NOTE:

If you are adding an additional Fibre Channel storage array or if your host

server is already configured to access Fibre Channel storage, some of the steps in

Table 1 may not apply. Before proceeding, see the

your existing hardware components and host bus adapter (HBA) firmware and

BIOS levels are supported.

at support.dell.com/manuals.

Support Matrix

Configuring Fibre Channel

to confirm that