Dell PowerVault MD3620f 배포 매뉴얼 - 페이지 35
{카테고리_이름} Dell PowerVault MD3620f에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3620f 36 페이지. Remote replication
Dell PowerVault MD3620f에 대해서도 마찬가지입니다: 구성 매뉴얼 (22 페이지), 설치 매뉴얼 (18 페이지), 지원 매트릭스 (17 페이지), 기능 매뉴얼 (15 페이지)
페이지 인쇄
Hardware Cabling Best Practices
Handling Static-Sensitive Components
Static electricity can damage memory modules, system boards, and other
static-sensitive components. To prevent damaging the system, follow
these precautions:
•
Move and store all components in the static-protective packaging.
•
Place components on a grounded surface before removing them from their
static-protective packaging.
•
Grounded surfaces include static-dissipating mats or grounded workstations.
•
Always be properly grounded when touching a static-sensitive component.
To properly ground yourself, wear a wrist strap or boot strap made for this
purpose.
•
Handle the component by its edges. Do not touch solder joints, pins, or
printed circuitry.
•
Use conductive field service tools.
Host Cabling for Remote Replication
The Remote Replication premium feature provides online, real-time
replication of data between storage arrays over a remote distance. In the event
of a disaster or a catastrophic failure at one storage array, a second storage
array can be promoted to take over responsibility for computing services. The
Remote Replication premium feature requires a dedicated host port for
replicating data between storage arrays. After the Remote Replication
premium feature has been activated, one host I/O port on each RAID
controller module is solely dedicated to replicating operations.
NOTE:
If Remote Replication is activated, host port 3 on each RAID controller
module is dedicated for the communication that occurs between the two
storage arrays (primary and secondary virtual disks). If the Remote Replication
premium feature is not being used, these host ports are available for ordinary
host connections.
Hardware Cabling Best Practices
C
35