Dell PowerVault MD3660i Series Storage Array 배포 매뉴얼 - 페이지 14

{카테고리_이름} Dell PowerVault MD3660i Series Storage Array에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3660i Series Storage Array 24 페이지. Storage arrays
Dell PowerVault MD3660i Series Storage Array에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 문제 해결 매뉴얼 (20 페이지), 문제 해결 매뉴얼 (18 페이지)

For more information, see the Support Matrix at support.dell.com/manuals.

Install the software and driver package included on the PowerVault MD Series resource media.

For information about installing the software, see

Using MD Storage Manager, update the RAID controller module and NVSRAM firmware to the latest versions

available on support.dell.com.

Click Tools → Upgrade RAID Controller Module Firmware from the Enterprise Management Window (EMW).

Stop all I/O to the storage array and turn off affected host systems attached to the storage array.

Turn off the storage array.

Turn off any expansion enclosure(s) in the affected system.

Cable the expansion enclosure(s) to the storage array.

Turn on the expansion enclosure(s) and wait for the enclosure status LED to turn blue.

10. Turn on the storage array and wait for the status LED to indicate that the unit is ready:

–

When power is on, the power on indicator lights solid green.

–

If the Service action required indicator lights amber, there is an error that can be viewed using the

PowerVault Modular Disk Storage Manager.

11. After the storage array is online and ready, turn on any attached host systems.

12. Using PowerVault MD Storage Manager, update all attached expansion enclosure firmware if it is out of date.

13. From the EMW, select the enclosure that you want to update and launch the Array Management Window (AMW).

14. Select Upgrade → EMM Firmware.

15. Click Select All to update all the attached expansion enclosures simultaneously.

16. Click Start.

Installing MD Storage

Manager.