Dell PowerVault MD3820f series 배포 매뉴얼 - 페이지 21

{카테고리_이름} Dell PowerVault MD3820f series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3820f series 34 페이지. Storage arrays
Dell PowerVault MD3820f series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 소유자 매뉴얼 (47 페이지)

페이지 인쇄

Installing PowerVault MD Storage

Software

The Dell PowerVault MD series resource media contains software and drivers for both Linux and

Microsoft Windows operating systems.

The root of the media contains a readme.txt file covering changes to the software, updates, fixes,

patches, and other important data applicable to both Linux and Windows operating systems. The

readme.txt file also specifies requirements for accessing documentation, information regarding versions

of the software on the media, and system requirements for running the software.

For more information on supported hardware and software for Dell PowerVault systems, see the Dell

PowerVault MD34xx/38xx Series Support Matrix at dell.com/support/manuals.

NOTE: It is recommended that you install all the latest updates available at dell.com/support/

manuals.

The PowerVault MD series resource media provides features that include the core software, providers,

and utilities. The core software feature includes the host-based storage agent, multipath driver, and

Modular Disk Storage Manager (MDSM) application used to configure, manage, and monitor the storage

array solution. The providers feature includes providers for the Microsoft Virtual Disk Service (VDS) and

Microsoft Volume Shadow-Copy Service (VSS) framework.

If Dynamic Host Configuration Protocol (DHCP) is not used, during initial configuration of the

management station, at least one network adapter must be configured on the same IP subnet as the

storage array's default management port (Controller 0 MGMT (port 1): 192.168.129.101 or Controller 1

MGMT (port 1): 192.168.129.102). After initial configuration, the management ports are configured

using MDSM and the management station's IP address can be changed back to the previous settings.

NOTE: Only two management ports per array are supported. The second port on each controller is

reserved.

NOTE: For more information about the Microsoft VDS and Microsoft VSS providers, see the Owner's

Manual. To install the software on a Windows or Linux system, you must have administrative or root

privileges.

The PowerVault MD series resource media offers the following three installation methods:

•

Graphical Installation (Recommended) — This is the recommended installation procedure for most

users. The installer presents a graphical wizard-driven interface that allows customization of which

components are installed.

•

Console Installation — This installation procedure is useful for Linux users that do not desire to install

an X-Window environment on their supported Linux platform.

•

Silent Installation — This installation procedure is useful for users that prefer to create scripted

installations.