Dell PowerVault MD3860f 배포 매뉴얼 - 페이지 22

{카테고리_이름} Dell PowerVault MD3860f에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3860f 36 페이지. Storage arrays

Installing MD Storage Manager

The PowerVault MD Series resource media contains software and drivers for both Linux and Microsoft

Windows operating systems.

The root of the media contains a readme.txt file describing changes to the software, updates, fixes,

patches, and other important data applicable to both Linux and Windows operating systems. The

readme.txt file also specifies requirements for accessing documentation, information regarding versions

of the software on the media, and system requirements for running the software.

CAUTION: Do not install MD Storage Manager exclusively on a virtual disk that is being actively

managed by MD Storage Manager. Instead, install at least one instance of MD Storage Manager

on a local disk that is running SMagent and SMmonitor. Installing management software only on

a virtual disk may prevent access to recovery information in the event of multiple physical disk or

enclosure failures.

For more information on supported hardware and software for Dell PowerVault systems, see the Support

Matrix at dell.com/powervaultmanuals.

NOTE: As a first step towards managing the array, always use MD Storage Resource DVD media to

update and install MD Storage Manager. For the latest updates and Support Matrix, see dell.com/

powervaultmanuals.

The PowerVault MD3860f Series storage firmware installer provides features that include the core

software and providers. The core software feature includes the host-based storage agent, multipath

driver, and MD Storage Manager application used to configure, manage and monitor the storage array

solution. The providers feature include providers for the Microsoft Virtual Disk Service (VDS) and

Microsoft Volume Shadow-Copy Service (VSS) framework.

NOTE: For more information about the Microsoft VDS and Microsoft VSS providers, see the

Administrator's Guide at dell.com/powervaultmanuals.

NOTE: To install the software on a Windows or Linux system, you must have administrative or root

privileges.

NOTE: If Dynamic Host Configuration Protocol (DHCP) is not used, initial configuration of the

management station must be performed on the same physical subnet as the storage array.

Additionally, during initial configuration, at least one network adapter must be configured on the

same IP subnet as the storage array's default management port (Controller 0 MGMT (port 0) :

192.168.128.101 or Controller 1 MGMT (port 0): 192.168.128.102). After the initial configuration, the

management ports are configured using MD Storage Manager and the management station's IP

address can be changed back to the previous settings.

NOTE: Only two management ports (Port 0) per array are supported. Second port on each

controller is reserved.