Dell PowerVault MD3860i Series 소유자 매뉴얼 - 페이지 16
{카테고리_이름} Dell PowerVault MD3860i Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3860i Series 50 페이지. Storage arrays
페이지 인쇄
Item
Indicator, Button, or
Connector
3
12 Gbps SAS IN port (2)
4
USB port
5
Mini USB port
6
Password reset switch
7
SAS expansion port (2)
8
10 Gbps iSCSI IN port (2)
9
Seven segment display
sequence
10
System identification
indicator
11
Controller fault indicator
12
Controller power
indicator
13
Cache active or cache
offload indicator
14
Battery fault indicator
Expansion Controller Modules
Use the expansion controller modules to expand the storage capacity up to a maximum of 120 disks (180
disks with premium feature), by daisy-chaining your storage enclosure with up to two MD3060e
expansion enclosures.
NOTE: Hot-plug of MD3060e expansion enclosure is not supported.
16
Icon
Description
Provides host-to-controller SAS connection.
Reserved port.
Dell support only.
Pressing this switch resets the password.
Provides SAS OUT connection for cabling to a daisy
chained expansion enclosure. Port 0 expansion port is
recommended.
Provides host-to-controller iSCSI connection.
Displays status or error codes for the storage array.
The system identification indicator blinks blue when
system identification switch push-button on the
enclosure front panel is pressed.
The controller fault indicator lights amber when
controller fault is detected.
The controller power indicator lights green when
controller power is on.
The cache active or cache offload indicator lights
green when on-board controller memory contains
data.
If AC power fails, this LED changes to indicate cache
offload status.
If the password reset function has successfully
changed the password, this LED flashes on and off
briefly.
The battery fault indicator lights amber when battery
backup unit or battery has failed.