Dell PowerVault MD3860i Series 소유자 매뉴얼 - 페이지 40

{카테고리_이름} Dell PowerVault MD3860i Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3860i Series 50 페이지. Storage arrays

Troubleshooting your system

Safety first—for you and your system

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

NOTE: If you need to replace a RAID controller, always hot plug the replacement controller when

the array is powered on. All new hard drives should be hot plugged to the array. Do not use drives or

RAID controller from another (foreign) array.

If your system halts during startup, check if:

•

The array emits a series of beeps.

•

The array fault LEDs are lit.

•

There is a constant scraping or grinding sound when you access the physical disk.

For assistance, contact Dell Support.

For information about troubleshooting loss of communication, see

Enclosure

Connections.

•

Verify that the cables are connected to the correct ports before troubleshooting any external devices.

For the location of the back-panel connectors on your storage array, see the Back-panel features

section in this document.

•

Ensure that all the cables are securely attached to the external connectors on your array.

•

For information on cabling, see the Deployment Guide for your storage array at dell.com/support/

manuals.

Troubleshooting Array And Expansion