Dell PowerVault MD3860i Series 소유자 매뉴얼 - 페이지 48

{카테고리_이름} Dell PowerVault MD3860i Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3860i Series 50 페이지. Storage arrays

Back-Panel Connectors (Per RAID Controller

Module)

Serial connector (debug port)

Management Ethernet connector

iSCSI connectors

Power

AC power supply (per power supply)

Wattage

Heat dissipation (maximum)

NOTE: Heat dissipation is calculated

using the power supply wattage rating.

The heat dissipation values are for the

entire system which includes chassis and

two controllers.

Voltage

NOTE: This system is also designed to be

connected to IT power systems with a

phase to phase voltage not exceeding

230 V.

Battery

Environmental

NOTE: For additional information about environmental measurements for specific system

configurations, see dell.com/environmental_datasheets.

Temperature

NOTE: SAS and iSCSI connections to the

same host is not supported.

Two SAS OUT ports, it is recommended that you

use the first port for expansion to an additional

PowerVault MD3060e expansion enclosure. Only

one expansion port is supported at any given time.

NOTE: SAS connectors are SFF-8644

compliant.

One 6-pin mini serial port

NOTE: For technical support use only.

One 100/1000 Mbps Ethernet connection for out-

of-band management of the enclosure and the

second Ethernet port is reserved.

Two 10 Gbps iSCSI IN connectors to connect

hosts

1755 W

5988 BTU/hr

220 V AC, autoranging, 50 Hz/60 Hz

6.6 V DC, 1100 mAh, 7.26 W Lithium ion battery