Dell PowerVault ML6000 시작하기 - 페이지 8

{카테고리_이름} Dell PowerVault ML6000에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault ML6000 24 페이지. Dell powervault ml6000 library managed encryption enablement instructions
Dell PowerVault ML6000에 대해서도 마찬가지입니다: 중요 정보 매뉴얼 (26 페이지), 시작하기 (12 페이지), 시작하기 매뉴얼 (4 페이지), 자주 묻는 질문 (26 페이지), 빠른 시작 매뉴얼 (7 페이지), 보충 설명서 (1 페이지)

Dell PowerVault ML6000 시작하기
Connect Parallel SCSI Cables
Perform this step if your library contains parallel SCSI tape drives.
There are two recommended ways to cable SCSI tape drives: two tape
drives per SCSI bus or one tape drive per SCSI bus.
To connect two tape drives per SCSI bus:
Connect one end of the SCSI cable to the top SCSI port of the
2a
bottom tape drive. Then connect the other end of the cable to the
bottom SCSI port of the tape drive above. To avoid possible
performance issues, do not connect more than two tape drives per
SCSI bus.
Use another SCSI cable to connect the bottom tape drive of the SCSI
2b
bus to your host system.
Use a SCSI terminator to terminate the top tape drive of the SCSI
2c
bus.
To connect one tape drive per SCSI bus:
Use a SCSI cable to connect the bottom port of the tape drive to your
2d
host system.
Attach a SCSI terminator to terminate the top port of the tape drive.
2e
2a
2b
2c
2d
2e