Dell PowerVault NX300 설정 - 페이지 2
{카테고리_이름} Dell PowerVault NX300에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault NX300 2 페이지. Document
Dell PowerVault NX300에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 (2 페이지), 문제 해결 매뉴얼 (17 페이지), 설치 지침 (2 페이지), 관리자 매뉴얼 (50 페이지)
페이지 인쇄
Setting Up Your Dell PowerVault NAS Solution (continued)
4
Initial Configuration
The PowerVault NAS Initial Configuration Wizard
runs when you first log on to the PowerVault NX300
storage system.
The initial configuration tasks include:
Changing the local administrator default password
•
Selecting the system language
•
•
Confirming the settings
The PowerVault NAS Initial Configuration Wizard also
configures the NAS specific software. Once the wizard
is complete, you will be prompted to reboot the system.
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the
written permission of Dell Inc. is strictly prohibited.
Dell , the DELL logo, OpenManage , and PowerVault are trademarks of Dell Inc.
Dell disclaims proprietary interest in the marks and names of others.
September 2009
5
System Configuration
Utility Share
Utility share is a Server Message Block (SMB) share preconfigured on your system. The utility share allows you to view system documentation either
locally or remotely using a web browser. To access the utilities loaded on your system, type \\D<ServiceTag>\NASUtils\
where <ServiceTag> is the Service Tag number located on the system.
Documentation
Documentation for the system is available in the utility share. For documentation and information updates, see the Dell Support website at
support.dell.com/manuals.
Dell OpenManage™ Server Administrator
You can monitor your system remotely using Dell OpenManage Server Administrator. To access Server Administrator, connect to the secure port 1311,
of your NAS system.
For example, type:
https://D<ServiceTag>:1311
where <ServiceTag> is the Service Tag number located on the system.
6
Additional Information
The Server Manager window opens when
the administrator logs on to the system.
Using Server Manager, you can perform the
following tasks:
Initial computer configuration
•
•
Configure networking
•
Change the computer name