Dell PowerVault RD1000 보충 설명서 - 페이지 4

{카테고리_이름} Dell PowerVault RD1000에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault RD1000 8 페이지. Usb 3.0 performance considerations
Dell PowerVault RD1000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (35 페이지), 시작하기 매뉴얼 (20 페이지), 중요 정보 매뉴얼 (7 페이지), 사용자 설명서 (29 페이지), 시작하기 매뉴얼 (4 페이지), 시작하기 매뉴얼 (35 페이지)

Performance Considerations

Optimizing the PowerVault RD1000 backup solution to provide the best data transfer speeds and

performance is a key focus for many system administrators. Now with the availability of the PowerVault

RD1000 USB 3.0 the key variable to consider for achieving the best throughput with the RD1000 solution

is implementing an end-to-end USB 3.0 solution.

The PowerVault RD1000 USB 3.0 comes complete with the RD1000 dock and the USB 3.0 interface cable,

both of which have been designed to meet the USB 3.0 specification. In order to get a complete USB 3.0

solution, the host system must also be capable of supporting USB 3.0. Most servers have USB 2.0

connections, so in order to realize the performance increase; the host server will need to install a USB

3.0 host bus adapter. By attaching the RD1000 USB 3.0 to a host server which only has USB 2.0 or older,

will limit the performance of the RD1000 significantly but will still provide a increase in performance as

compared to USB 2.0 to USB 2.0 connection .

The PowerVault RD1000 USB 3.0 has been put through Dell's rigorous performance testing suite which

measures the read and write performance across multiple different RD1000 configurations. These

performance measurements were compiled and are presented in figures 1 and 2 below to show the

benefits of the RD1000 USB 3.0 over the USB 2.0 version.

Multiple data sets were used; however, the primary data set consisted of 10 GB or randomly generated

data. There were 6,169 files ranging in size from 6 KB to 4 MB which were distributed in nested folder

structure of 157 folders. All testing was performed using the data protection software which is included

with the PowerVault RD1000, Symantec BackupExec 2010 QuickStart.

Backup and restores were performed to and from multiple RD1000 USB 2.0 and USB 3.0 docks with

varying combinations of USB 2.0 and USB 3.0 cables and hosts. Averages were then taken across the

various performance tests with each RD1000. Figure 1 shows the results of the write performance on

the RD1000. Three configurations were tested:

1) RD1000 USB 3.0 end-to –end solution,

2) RD1000 USB 3.0 with a USB 2.0 host,

3) RD1000 USB 2.0 end-to-end solution.