Dell PowerVault Storage Area Network 매뉴얼 - 페이지 8
{카테고리_이름} Dell PowerVault Storage Area Network에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault Storage Area Network 37 페이지. Setting up vranger on the dell dr4x00 disk backup appliance
Dell PowerVault Storage Area Network에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (10 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지), 매뉴얼 (24 페이지), 매뉴얼 (23 페이지)
페이지 인쇄
Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --add --gc-window Anytime
Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --add --dedupe-window Never
Finally if you are configuring SmartDisk on a CIFS / UNC path hosted on the DR4X00 it is recommended that a block
size of 512000 be set before data protection operations are conducted from the target configuration. In order to set
the block size of the SmartDisk instance run the following command:
Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --update –webdav 37453 --block-size 512000
Note: By default the block size is set to 32 and the webdav port to 37543. These settings should be considered when
using the above for reference.
Once the configuration settings have been applied the SmartDisk services should be restarted. Execute the following
command as needed:
Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) restart
The newly configured SmartDisk instance should be ready for use within a given NetVault Backup domain. Verification
of the newly configurated volumes and attributes should be conducted by running the following command:
Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --show
Once all settings have been verified and the configuration has been deemed fit for use the SmartDisk instance can
now be added to the NetVault Backup server.
8
Setting up NetVault SmartDisk on the Dell™ DR4X00 Disk Backup Appliance