Dell PowerVault TL4000 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Dell PowerVault TL4000에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault TL4000 7 페이지. Tape library
Dell PowerVault TL4000에 대해서도 마찬가지입니다: 릴리스 정보 (3 페이지), 시작하기 (38 페이지), 자주 묻는 질문 (26 페이지), 소프트웨어 설명서 (16 페이지), 구성 매뉴얼 (22 페이지), 중요 정보 매뉴얼 (10 페이지), 사용자 설명서 부록 (2 페이지), 시작하기 매뉴얼 (3 페이지), 첨부 파일 지침 (17 페이지), 브로셔 (4 페이지), 사용자 설명서 (20 페이지)

3. On the EKM Server Certificate Configuration page (Figure 2) enter the key store alias and fill in any

additional fields that may serve to identify the certificate and its purpose. Click Submit and Start

Server.

Figure 2. EKM Server Certificate Configuration Page

Note: Interrupting the Encryption Key Manager GUI during key generation requires an Encryption

Key Manager re-install.

Keystore file corruption will occur if your stop the Encryption Key Manager key generation

process before it is complete. To recover from this event, follow these steps:

v If the Encryption Key Manager was interrupted during the initial install, navigate to the

directory where the directory is located (example x:\ekm). Delete the directory and restart

the install.

v If the Encryption Key Manager was interrupted while adding a new keygroup, stop your

Encryption Key Manager server, restore your keystore file with the latest backup keystore

(this file is located in your x:\ekm\gui\backupfiles folder). Note that the backup file

contains the date and time stamp as part of the file name (for example,

2007_11_19_16_38_31_EKMKeys.jck). The date and time stamp must be removed once the file

is copied into the x:\ekm\gui directory. Restart the Encryption Key Manager server and add

the key group that was previously interrupted.