Dell PS Series 설정

{카테고리_이름} Dell PS Series에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PS Series 2 페이지. Storage array
Dell PS Series에 대해서도 마찬가지입니다: 설치 (2 페이지)

페이지 인쇄
Dell PS Series 설정
Setting Up a PS Series Storage Array
PS6610 Installation
Before You Begin
This poster is a condensed reference. Read the PS6610 Storage Arrays Installation and Setup Guide (provided in the box) for complete
installation information.
Register for a Dell™ EqualLogic® Customer Support Account.
If you do not have a customer service support account, go to
Download and Read the Release Notes from the Support Site.
The PS Series Storage Arrays Release Notes contain the latest product information.
Review Safety Guidelines.
Review the safety instructions in your Safety, Environmental, and Regulatory Information booklet located in the shipping box.
Prepare for Installation:
 Environmental requirements
Make sure the installation location meets the power, cooling, and ventilation requirements described in the PS6610 Storage Arrays
Installation and Setup Guide (located in the shipping box).
 Networking requirements
- Standard Ethernet and TCP/IP networking rules apply to a PS Series SAN
- 10 Gigabit Ethernet
 Hardware requirements (not supplied)
- Standard 19-inch, four-post rack rated for a minimum of 680Kg (1500 lbs) static load
- For Ethernet connections (use a minimum of one 10GbE port per controller):
 With the 10GBASE-T port, CAT6 (or better) cable for up to 55 meters, CAT6A for up to 100 meters
 With the SFP+ port, optical cable or copper SFP+ cable
- For Management connections (optional): CAT5 cable with RJ45 connector
1
Unpack the Shipping Box
Caution:
Protect sensitive hardware. Use an electrostatic
wrist strap or a similar form of protection when handling hardware.
Shipping box contents:
 Setup poster (this document)
 Rail kit
 Power cables
 Documentation
 PS Series Storage Array
 Host Integration Tools CD for Microsoft
 Torx T20 key for drawer locks
 Boxes of disk drives in carriers (DDICs)
eqlsupport.dell.com/secure/login.aspx
and create one.
2
Install the Rails into the Rack
1. Remove the rail kit from the shipping box.
2. Install the rails into the rack.
See the Rack Installation setup poster for detailed instructions.
3
Install the Array into a Rack
Warning!
The array is heavy. Do not attempt to lift the array
without assistance.
Mount the array into a four-post, 19-inch rack.
1. Slide the array onto the rails.
2. Hand-tighten the thumbscrews to the front of the rack.
4
Install all of the Drives
Caution:
Protect sensitive hardware. Use an electrostatic
wrist strap or a similar form of protection when handling hardware.
When installing 42 drives, there must be two complete rows of HDs
in the top drawer (slots 0-27) and one complete row of HDs in the
bottom drawer (slots 42-55). For the optional 84-drive hybrid
configuration, the 14 SSDs must be inserted in the front row of
the top drawer (slots 0-13).