Dell PS-M4110 매뉴얼 - 페이지 18

{카테고리_이름} Dell PS-M4110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PS-M4110 22 페이지. Blade array

페이지 인쇄

A. Port Map

This appendix contains the port mapping information for the IOMs used during testing.

During testing of each M-Series IO Module, the blade servers and PS-M4110 blade arrays remained in

the same server slots, resulting in an internal port mapping that was similar for all three IOMs. The

Force10 MXL has 32 internal network connections and the per server slot connection map is illustrated

in Figure 4 below. The PowerConnect M8024-k IO module and the PowerConnect M8428-k IO modules

both have 16 internal network connections and the common per server slot connection map is

illustrated in Figure 6.

Where each IO module differs is in the inter-switch connection between the two IO modules in the

fabric. Since this set of connections uses the external ports available, each IO module's configuration as

tested is provided in Figure 5, 0, and Figure 8.

In all configurations tested, the IO modules illustrated below were installed into the Fabric Slots "B1"

and "B2".

Figure 4

Force10 MXL "Front-end" port map for IOM testing

M620-1P1 P1 P17

M620-2P1 P2 P18

PSM-C0P0 P5 P21

PSM-C1P0 P6 P22

M620-8P1 P8 P24

PSM-C0P0 P13 P29

PSM-C1P0 P14 P30

P3 P19

P4 P20

P7 P23

P9 P25

P10 P26

P11 P27

P12 P28

P15 P31

P16 P32

M620-1P2 P1 P17

M620-2P2 P2 P18

PSM-C0P1 P5 P21

PSM-C1P1 P6 P22

M620-8P2 P8 P24

PSM-C0P1 P13 P29

PSM-C1P1 P14 P30

Server Connections

Array Connections