Dell PS4100 하드웨어 유지 관리 매뉴얼 - 페이지 24

{카테고리_이름} Dell PS4100에 대한 하드웨어 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PS4100 47 페이지. Storage array
Dell PS4100에 대해서도 마찬가지입니다: 하드웨어 매뉴얼 (50 페이지), 개요 (7 페이지), 설치 및 설정 매뉴얼 (41 페이지), 설정 (2 페이지)

페이지 인쇄

PS4100 Hardware Maintenance Guide

Single Controller Configuration

A single control module is a single point of failure. If the control module fails, the entire array (and all the

volumes on it) becomes unavailable. Dell strongly recommends buying an array with two control modules,

or installing a second control module in a single-controller array.

In an array with a single control module, the module must be in slot CM0.

Caution: For proper array cooling and airflow requirements, there must be a blank filler in the empty con-

trol module slot.

Dual Controller Configuration

A dual control module configuration eliminates a single point of failure in the array. If the active control

module fails, the secondary control module takes over immediately with no interruption of service. This

gives you time to replace the failed control module while your volumes and data remain accessible.

Interpreting Control Module LEDs

Control modules have the following LEDs:

• The Ethernet ports and the Management port each have two green LEDs that indicate the port's status

and activity.

• Below the release latch is a column of three LEDs that indicate the status of the entire control module.

Figure 14 Control Module LEDs

Maintaining Control Modules