Dell SC180 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Dell SC180에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SC180 37 페이지. Storage center
Dell SC180에 대해서도 마찬가지입니다: 소유자 매뉴얼 (39 페이지)

페이지 인쇄
Dell SC180 소유자 매뉴얼
Item
Name
1
Drawer-specific
anti-tamper locks
2
Drawer-specific left
and right side
status indicators
3
Drawer-specific left
and right side
expansion
enclosure activity
indicators
4
Status indicator for
expansion
enclosure
8
Panel
Description
Locks the drawer shut using a Torx T20
screwdriver until the red arrows point to the
locked icon (away from the center of the
chassis).
•
Sideplane OK/Power Good:
– Off — Sideplane card or cable fault
– Green — Sideplane card and cable are
functional (though a fault may be
indicated by one or more of the
following LEDs)
•
Drawer Fault: Amber — Sideplane card
fault or drive failure causing loss of
availability or redundancy
•
Logical Fault:
– Amber (steady) — Host indicated drive
fault
– Amber (flashing) — Arrays in impacted
state
•
Cable Fault: Amber — Cable fault
Activity Bar Graph: Six variable-intensity
LEDs dynamically displaying access of the
drives in that specific drawer.
•
Unit ID Display: A numerical display
whose primary function is to display the
unit identification number.
•
Input Switch: Not currently used (though
it can be used to set the Unit ID Display,
the ID will be automatically reset by the
Storage Center Operating System)
•
Power On/Standby:
– Off — The expansion enclosure does
not have power
– Green — The expansion enclosure is
on (operational)
– Amber — The expansion enclosure is
in standby (not operational)
•
Module Fault: Amber when there is a
hardware fault (additionally, an LED may
be lit on a PSU, drawer, DDIC, fan
module, or IO module indicating the part
at fault)
About the SC180 Expansion Enclosure