Dell SC180 소유자 매뉴얼 - 페이지 32

{카테고리_이름} Dell SC180에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SC180 39 페이지. Storage center
Dell SC180에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지)

페이지 인쇄
Dell SC180 소유자 매뉴얼
Figure 24. Replacing an EMM
1.
EMM
5.
Insert the replacement EMM into the bay until it is fully seated.
6.
Push the release lever toward the chassis until it clicks into place.
7.
Reconnect the SAS cables to the EMM.

Replacing Rack Rails

Rack rails are used to install the SC180 expansion enclosure into a rack.
Prerequisites
1.
Use SupportAssist to send diagnostic data to Dell Technical Support Services.
2.
Shut down the expansion enclosure using the Dell Storage Client.
About this task
NOTE: Replacing rack rails must be performed during a scheduled maintenance window when the
Storage Center system is unavailable to the network.
Steps
1.
Make sure all the cables are labeled.
2.
Disconnect all the cables from the expansion enclosure.
3.
Remove the plastic covers from the chassis ears.
4.
Remove the screws that secure the chassis to the rack.
5.
Remove the expansion enclosure from the rack rails.
32
2.
EMM release tab and lever
Replacing SC180 Expansion Enclosure Components