Dell SC7020 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Dell SC7020에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SC7020 22 페이지. Sc7020 series
Dell SC7020에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (15 페이지), 소유자 매뉴얼 (20 페이지), 시작하기 매뉴얼 (17 페이지)
페이지 인쇄Item
Name
3
Power switch (2)
4
Power supply/
cooling fan module
LED handle
5
Power socket (2)
SC7020 Storage System Drives
The SC7020 storage system supports Dell Enterprise hard disk drives (HDDs) and Dell Enterprise solid-
state drives (eSSDs) only.
The drives in the SC7020 storage system are installed horizontally. The indicators on the drives provide
status and activity information.
Figure 3. SC7020 Storage System Drive Indicators
Item
Control/Feature
1
Drive activity
indicator
2
Drive status
indicator
SC7020 Storage System Hardware
Icon
Description
– Slots for optional front-end connectivity – Fibre
Channel and iSCSI I/O cards
– Slots for optional back-end connectivity – SAS I/O
cards
•
SAS expansion ports – Two 12 Gbps SAS ports
•
USB port – Single USB 2.0 port
•
MGMT port – Embedded Ethernet port that is typically
used for system management
•
Serial port – Micro-USB serial port used for initial
configuration and support-only functions
—
Controls power for the storage system. Each PSU has one
switch.
The handle of the PSU indicates the DC power status of the
—
PSU and the fans.
•
Not lit – No power
•
Solid green – PSU has valid power source and is
operational.
•
Blinking amber – Error condition in a PSU
•
Blinking green – Firmware is being updated.
•
Blinking green then off – Power supply mismatch
—
Accepts the following standard computer power cords:
•
IEC320-C13 for deployments worldwide
•
IEC60320-C19 for deployments in Japan
Indicator Code
•
Blinking green – Drive has I/O activity
•
Steady green – Drive is detected and has no faults
•
Steady green – Normal operation
•
Blinking green – A command was sent by Dell Storage Manager to
the disk to make the LED blink so that users can identify the disk in
the rack.
•
Blinking amber – Hardware or firmware fault
7