Dell SC7020F 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Dell SC7020F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SC7020F 20 페이지. Sc7020 series
Dell SC7020F에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (17 페이지)

Figure 6. Installing and Removing the Bezel

Keylock

Install the Front Bezel

To secure the storage system, install the front bezel.

Hook the right end of the replacement bezel onto the front panel of the storage system.

Insert the left end of the bezel into the securing slot until the release latch locks into place.

Secure the bezel with the keylock.

The SC7020 series storage system supports hot-swappable hard drives.

•

In the SC7020 storage system, a minimum of 4 SSDs or 7 drives must be installed in the chassis or in an expansion enclosure.

•

In the SC7020F storage system, a minimum of 4 SSDs must be installed in the chassis or in an expansion enclosure.

The drives are installed from left to right, and then top to bottom. The first row of drives are numbered from 0–4 from left to right,

the second row of drives are numbered from 5–9 from left to right, and so on.

Storage Manager identifies drives as XX-YY, where XX is the number of the unit ID of the storage system and YY is the drive

position inside the storage system.

Figure 7. SC7020 Series Storage System Drive Numbering

Replacing SC7020 Series Storage System Components

Front bezel