Dell SC9000 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Dell SC9000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell SC9000 18 페이지.
Dell SC9000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (10 페이지)
페이지 인쇄
Front Panel Features and Indicators
The front panel of the storage controller contains power and reset switches, and an LCD panel that
shows system ID, status and error information.
Figure 1. Front Panel Features and Indicators
Item
Indicator, Button, or
Connector
1
Power-on indicator,
power button
2
NMI button
3
System identification
button
4
Video connector
5
LCD menu buttons
6
Information tag
6
Icon
Description
The power-on indicator lights when the system
power is on. The power button controls the power
supply output to the system.
Not used for the SC9000.
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the front LCD panel and the back system
status indicator flash until one of the buttons is
pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset the iDRAC (if not disabled in F2 iDRAC
setup) press and hold the button for more than 15
seconds.
Allows you to connect a display to the system.
—
Allows you to navigate the control panel LCD
menu.
A slide-out label panel that records system
―
information such as the Service Tag.
About the SC9000